The Wi-Fi routers manufactured by TP-Link Corporation have been exceptional in their ability to provide internet connectivity to a variety of devices that connect to the home network. You will need to make changes to the network that you have set up several times. You will need to change the password, login name, and SSIDs and add restrictions to networks such as parental controls or smart setup to configure the new tp link archer ax55. Do all of this by accessing the TP-Link Wi-Fi router login page. This is also the admin page for routers like the tp link archer ax55 device. This blog will walk you through the easy steps to tp link ax3000 installation.
How can you access the smart configuration wizard for the TP-Link Wi-Fi router login?
Follow these steps, to begin with, the tp-link ax3000 installation on the TP-Link Wi-Fi router login page:
- To reach the TP-Link router Login page, it is essential that your computer or laptop receives a valid IP address from the gateway. You can verify this by going to the command prompt, and typing the command “ipconfig”. If an IP address is visible in front of the text “gateway”, you will know it.
- An Ethernet cable can be used to connect your laptop or PC to the router. You can connect wirelessly to the router using an Ethernet cable. The password printed on the label at the back of tp link archer ax55 router will allow you to connect to it wirelessly. Connect the Ethernet cable to your PC or Laptop, and then connect to the router’s LAN port.
Accessing the online setup wizard
- Once the device has successfully connected to the router, open a web browser and head over to the IP address or the URL of the said page which are https://192.168.0.1 and tplinkwifi.net. This will take you to the Smart Setup Wizard page for the TP link archer ax55 router.
- The language you wish to continue using will be asked. Choose the correct one and then continue the login process.
- After this, you will need to enter the Username/Password information to proceed with the tp link ax3000 installation process.
- If you are logging in for the first time, smart setup will automatically start once you have entered the tp-link ax3000 installation password. This password can be found on the TP-Link router setup manual. You can use ‘admin’ as both username and password to log in. The admin password for TP-Link is the default password. It allows you to access admin access and device information.
Configuring the settings
- After the tp link ax3000 installation has started, your internet connection is automatically identified and set up to the correct settings. You can also stop the router from detecting your connection and manually fill out the details.
- If you wish to modify the SSID password and username, as well as the admin access details, you will be asked.
- Once you have created the SSIDs to access the wireless channels, configure the security settings for your router. You should set it to WPA2 personal.
- On the next page, you will see all settings that you have chosen. The final screen will display a summary of the settings you have configured. Review the same and click on the Finish button to conclude the installation process.
Logging on to the tp-link archer ax55 IP (i.e. http://192.168.1.1 or http://tplinkwifi.net for the TP-Link router admin access will let you make these changes easily. You should make sure the password you use to set up your TP-Link router is strong enough. A simple breach in security can compromise the safety of the entire network.
The tp link ax3000 installation process is now complete and you can connect your wireless devices to its network easily.